These Adapters are used WITH your current standard risers. These can be used with standard risers 1 inch and larger. The Adapters are bolted on top of your standard risers by passing 3 bolts through the adapters, then through your standard risers then screw into the factory holes in the triple clamp. Then the factory handlebars are bolted to the adapters in their new, closer position to the rider.
-Handlebar pullback / offset: (25.4mm) 1 inch + the pullback from your risers
-Handlebar lift: (12.7mm) 1/2 inch + the lift from your risers
*Application: 2010-Current Kawasaki Concours 14. These will not work on 2008-2009 due to the location of the storage compartment.
If you want the benefits of the Pullback Risers offered by Advanced Sport Touring, but you've already invested in a standard set of risers, this is what you need. These bolt to the top of anyone's standard set of risers and move the handlebars back towards the rider 1 inch. Must be used with risers 1 inch and larger.
No cutting, welding, drilling or adding of clutch or brake cables.
***Standard Risers are NOT included. You need to provide them or purchase a set of Standard Risers from Advanced Sport Touring. This listing is for a set of Riser Adapters and hardware only.
**Don't forget to select what size risers these will be used with. This selection determines what size bolts you will receive.
*We no longer include Loctite or Bolt Caps regardless of what the instructions say.
-Using Wedges with Riser Adapters does not require additional bolts. See "Wedge and Riser Adapter Bolt Diagram" download in "Instructions" section.
1400GTR pull back riser adapters 
