Home > Misc. >

Givi Kit for AST Luggage Racks
Givi Kit for AST Luggage Racks


 
Price: $25.00


Product Code: C14-19
Qty:

Description
 
If you purchased an Advanced Sport Touring luggage rack without the Givi kit and have now decided you would like to add it, this is what you need.  It includes all the pieces necessary to attach a Givi Monokey Touring Case to our luggage racks.

Average Rating: 4 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
Need some adjustments waiting to have it done June 2, 2013
Reviewer: Manuel Santibanez from San Antonio , TX United States  
Every thing is place , Ryan help me to make the drills in the plate , every thing fine, just some adjustment is needed to look the triangle into the case slot , Ive to adjust the triangle high , just waiting spanner bit kit to take out security screws.

Disregarding the above comment I want to thanks Ryan who always has been able to help , exceeding expectations , fast , very fast response and always open to help , awesome this service, with this guys you know someone is in the other side of the line ready to help and support you.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Givi Kit for AST Luggage Racks March 18, 2013
Reviewer: William Ludtke from Winter Park, FL United States  
The Kit installed fairly easily for someone like me with a drill press, a  tap and die set and experience with metal fabrication. The one flaw I found with the finished installation is that the screws holding the lock block are easily accessible and could be removed, by anyone with a Phillips screw driver, allowing the bag to be stolen in about 30 seconds or less. I fixed this situation by fabricating  a piece of
1/2"Hx3/4"Wx2-3/4"L rectangle aluminum bar stock with 2 blind holes drilled in the top side large enough to cover the screw heads and a threaded blind hole at each  end. I then drilled and countersunk holes in the rack plate  for flat head machine screws to be installed at either end of the lock block from the top down securing the bar stock to the bottom of the rack plate so the only way to access the lock block mounting screws is to remove the bag and the countersunk machine screws, allowing the aluminum block to be removed exposing the lock block mounting screws.

Was this review helpful to you?