Original text

  Home > Clearance >

CLEARANCE 2 inch Pullback Risers V2
Concours 2 inch risers

Price: $120.00

Availability:: Usually Ships in 24 Hours
Product Code: C14-03-2

Description Installation Instructions
***I have six sets of clearance Pullback Risers available. It has a couple knicks in the metal. The product will function and mount with no problem. These are an as-is purchase. Basically, when they were being hung on the rack to be powder coated, they fell on the ground and caused a ding/dent/mark in the metal. They aren't perfect so we're offering them at a discount. These are ONLY available in BLACK finish. Each one varies and we don't have pictures of each one.

Fitment: Works on Kawasaki Concours 14, 2010 - Current model with and without ABS

Due to the location of the glove box on 2008 & 2009 models, Pullback Risers will not work on those model years.

Modified 2 inch handlebar risers to give more offset towards the rider.

Handlebar Pullback: 1 1/2" (or 38mm)

Easy Install. Takes only 20 minutes to complete.

Tools Required: 5mm & 6mm Allen Key. 10mm & 12mm wrench or socket.

If you're looking for an upright riding position, these risers are the ones for you. Not only do they raise the handlebars to decrease the lean, but they also pullback towards the rider so you don't feel like you have a set of ape hangers.

These risers also have cut-aways for the front forks designed to allow you to lower your front suspension.

Advanced Sport Touring Pullback Risers have the maximum amount of rise and pullback available without having to modify your brake and clutch lines. These are a direct bolt-on with minimal re-routing of lines needed to accommodate the risers. Don't be worried about the term "re-routing;" it just refers to the pulling of slack of the lines. You won't be adding lines, bleeding brakes, cutting or drilling.

Pullback Risers are CNC cut from a solid 2 inch block of T6 6061 aluminum for added strength and includes all mounting hardware to complete the install.

Related Products
Ram Ball Accessory Mount
Price: $20.00
Motorcycle Phone Mount with RAM Ball

Average Rating: 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
Happy as a Clam September 2, 2016
Reviewer: Daniel B from Rochester, WA United States  
Received item quickly and am quite happy.  Quality is excellent.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Pullback Risers August 3, 2014
Reviewer: John Schmidt from Weaverville, NC United States  
Completely satisfied.Quality product,Prompt shipping,and they greatly improve the ergonomics on my C14.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Very Good August 16, 2013
Reviewer: scott ostreicher from san antonio, TX United States  
Was sent the pictures that appeared to show some damage hence the clearance part.  The ones I was sent showed very little damage and what was flawed was covered when handlers installed.  Thanks for the deal.

Was this review helpful to you?